GDU dashes - SO Engineering

GDU 170 / 172

Prices:

GDU-170.1: 759 €
GDU-172: 849 €

All prices include VAT 24 %

Dash

4.3” WQVGA of 16:9 TFT graphic display
480 x 272 px resolution
16.7M colors (8bit x RGB)
Brightnes up to 800 cd/m2
7 RPM and 2 alarm/multifunction LEDs, separately dimmable, user configurable

CAN-bus

1 Mbit/s throughput data rate. 2.0B protocol
Selectable CAN bus speed: 1 Mbit/s and 500, 250, 200 and 125 kbit/s
Software selectable 120 Ω termination
Protection against short circuit to ground and battery

1 Vbattery re-read

Sampling resolution: 12 bits
Voltage partition 5mV
Analogue anti aliasing filter

2 Internal temperatures

Sampling resolution: 12 bits
Temparture range: -40 / +120°C

Overall dimensions

Without connector : 125 x 85 x 22 mm
With connector: 125 x 85 x 35 mm
Connector: IMC24-2212
Weight: 220 g

Enclosure

Machined aluminium
IP grade: IP44 (IP67 on request)

Tremondi dashes are programmed with Peak CAN-USB CAN interface

GDU-172 ADDITIONAL FEATURES

1 Internal Vref reread (GDU-172)

Reread VREF/2
Sampling resolution: 12 bits
Analogue anti-aliasing filter

1 External reference supply (GDU-172)

Protected against short circuit to ground or Vbattery
Supply voltage: 5 V
Reread voltage measured at connector pin
Maximum current: 100 mA

2 Single ended analogue inputs (GDU-172)

Internal SW selectable pull-up: 1 kΩ to 5V
Sampling resolution: 12 bits
Input resistance: 380 kΩ (VREF pull-up)
Analogue anti aliasing filter
Full compatibility with 0 – 5 V sensors
Protection against short circuit to Vbat

2 Combined analogue / Hall inputs (GDU-172 )

Internal SW selectable pull-up: 1 kΩ to 5V
Analogue anti aliasing filter
Full compatibility with 0 – 5 V sensors
Works with open collector or PP output sensors

Link to web shop