SP-WRC3 English

SWP-WRC3.3 steering wheel CAN push button panel

SWP-WRC3.3

Price: 1445 €
Sticker: 80 €
All prices with VAT 24 %

Designed for OMP 320 ALU steering wheel. Steering wheel diameter 320 mm. Fixing on steering wheel by 3 bolts and support plate. Steering wheel spokes cannot be modified - FIA regulation.

1 CAN line. 1 Mbit/s throughtput data rate. 2.0B protocol.
Selectable bus speed: 1 Mbit/s and 500, 250, 200, 125 and 100 kbit/s
Software selectable 120 Ω terminator
Protection against short circuit to ground and battery
1 Digital input for programming enable (ENCP)

Input resistance: 4.7 kΩ (5V pull-up)
Upto 8 Keyboard buttons with backlighting and integrated 2-color gauge LEDs
Button state transmitted on CAN
2 Mechanical rotary switches. Mechanical endless with electrical „smart stop“ feature. Number of positions adjustable by SW.2 On–Off drivers.

High side driver Vbattery, up to 1 A
Output voltage reread
Linear current limitation
Overload, over temperature feedback and protection
Upto 10 Gauge LEDs. 2 color state (red – green).
LED color adjustable by SW within red – green scale
Brightness adjustable by SW
2 Status Gauge LED groups at rotary switches
6 single colour LEDs at each rotary switch. Each LED group has its independent control – internally (by firmware) or via CAN
Position can be memorized at power off
LED colors can be modified on request (HW modification)

1 Internal temperature
Sampling resolution: 10 bits
Temperature range: -40 / +120 °C

Sampling resolution: 10 bits
Voltage partition 20 mV
Analogue anti aliasing filter

Overall dimensions:

Without cable: 189 x 118 x 24 mm
Including rotary knobs: 189 x 118 x 39 mm
20 cm cable with ASL606-05PB connector. Mating connector (ASL106-05SB) available separately.

Enclosure:

Machined aluminum / ABS cover
IP grad: IP54
Weight (without steering wheel): 245 g
Fixing on steering wheel by 3 bolts and support plate

Software programable with PEAK PCAN-USB interface cable

Specification

Link to web shop

​SO ENGINEERING

SO ENGINEERING