CANchecked MFD28 Gen 2 basic monitoiminäyttö

  • €468,00
    Unit price per 
Tax included. Shipping calculated at checkout.


MFD28 Basic Gen 2.

  • 2.8 "TFT kosketusnäyttö, MicroSD, MicroUSB
  • CAN bus switching mahdollistaa kosketusnäytön käytön kahdeksan CAN ohjausviestin lähettämiseen. Eli voi lähettää CAN ohjausviestejä toisiin CAN järjestelmiin, kuten vaikka moottorin ECU:lle tai PDM-laitteelle. Tällä hetkellä CAN bus switching tuotetut ohjainyksiköt:
    • triject bee/premium
    • ECUMASTER BLACK
    • LinkECU
    • Megasquirt with turbocorse custom firmware*
    • MME ECU481
    • MaxxECU
  • Näytön symboleja voidaan liikutella ja kokoa muuttaa "drag'n'drop"
  • 64 anturia (CAN Bus + sisäiset)
  • 10 sivua, jopa 17 widgettiä per sivu
  • 4 x analogia sisääntuloa
  • 2 x  pyörimisnopeus sisääntuloa
  • 1 x PWM ulostulo
  • 1 x digital ulostulo 
  • CAN yhteensopiva ISO 11898-2 ja SAE J2284
  • Syöttöjännite 12 V
  • Virrankulutus 250 mA
  • Toimintalämpötila: -10...+70 °C
  • Datan talkennus SD-kortille tai USB-muistille. Jälkianalyysi PC-ohjelma.
  • CAN-väylä loggeri, jolla voi  mm. "reverse engineer" tutkia CAN dataa

Tuetut ohjainyksiköt:

  • Trijekt (Premium, Bee, trigifant) - trijekt plus rajoituksin
  • Megasquirt 2 ja 3
  • K-Data KDFI
  • UMC1 / UMC2
  • Ecumaster EMU Black ja Classic (CAN-väylä adapterin kanssa)
  • van Kronenburg KMS MD35 ja MP25 (CAN-väylä adapterin kanssa) - VAG (VW / Audi / Seat)
  • Motorsport Electronics ME221 / ME442 (CAN Bus)
  • LinkECU
  • MaxxECU
  • Motec
  • SCS Delta
  • BMW E46 Can Bus Protocol
  • VW / Audi Can Bus Protocol
  • OBD2 Can Bus (250 / 500kbit 11 / 29bit)
  • Adapterin kanssa:
    • VEMS
    • ME221
    • Jos ohjainyksikköäsi ei ole mainittu listalla, ota yhteyttä

    Mitat

    • Asennusaukon koko: 70,3 x 52 mm
    • Näytön reunojen mitat: 94 x 58 mm
    • Syvyys 18,5 mm
    • Näytön reunan paksuus 4,5 mm

    Vaihtovalot optio

    • 8 kpl raja-arvoja väreillä ja välkytyksellä
    • Kirkkauden säätö

    Tiedonkeruu SD-kortille. Web pohjainen ohjelmisto.

    KEY FEATURES OF THE MFD32S

    Hardware:

    • 2.8 "TFT screen, touchscreen , MicroSD, MicroUSB
    • CAN bus switching. Be it Launch Control, ECU, boost pressure map or maybe just turning on the fan. You can now accommodate a separate switch in the cockpit for each function. You can place a widget on the screen and change the type of widget to "CANSwitch". Now you have the option to choose between EIGHT different switches. Currently supported CAN bus switching:
      • triject bee/premium
      • ECUMASTER BLACK
      • LinkECU
      • Megasquirt with turbocorse custom firmware*
      • MME ECU481
      • MaxxECU
    • Widgets can be moved and resized using drag'n'drop. Up to 17 widgets.
    • 64 sensors (CAN Bus + internal)
    • 10 views
    • 4 x analog inputs
    • 2 x speed inputs
    • 1 x PWM output
    • 1 x digital output
    • CAN bus switching
    • Supply voltage 12V
    • Suppy current 250 mA
    • Operating temperature -10...+70 °C
    • Data logging on SD-card or USB-memory. Post processor PC-software.
    • CAN-bus logger. Can be used for reverse engineer, etc.

    Supported control units:

    • Trijekt (Premium, Bee, trigifant) - trijekt plus with restrictions
    • Megasquirt 2 and 3
    • K-Data KDFI
    • UMC1 / UMC2
    • Ecumaster EMU Black and Classic (with CAN bus adapter)
    • van Kronenburg KMS MD35 and MP25 (with CAN bus adapter) - VAG (VW / Audi / Seat)
    • Motorsport Electronics ME221 / ME442 (CAN bus)
    • LinkECU
    • MaxxECU
    • Motec
    • SCS Delta
    • BMW E46 Can Bus Protocol
    • VW / Audi Can Bus Protocol
    • OBD2 Can Bus (250 / 500kbit 11 / 29bit)
    • With serial adapter:
      • VEMS
      • ME221

    If your control unit is not listed, please contact us

    Compatible with ISO 11898-2 and SAE J2284.

    The control unit manufacturers themselves determine which values ​​are sent via the CAN bus interface. Documentation is important here - possibly even in the form of a DBC file that can be imported directly. You can also access our extensive list of already implemented control units. This can be found in the: download area . A total of up to 50 sensors can be queried if the manufacturer supports this.

    Data that are available in the broadcast as well as OBD2 queries via Can Bus (11bit / 29bit) are implemented. Special protocols such as TP2.0 from VW / Audi and UDS are also available.

    If the desired control unit is not listed, please contact us.

    Dimensions and fastening

    • Installation opening 70,3 x 52 mm
    • Size, outer edges,: 94 x 58 mm
    • Depth 18,5 mm
    • Cover thickness 4,5 mm

    The log viewer downloads log files from the display. You can then look at these and select and scale values ​​individually. A built-in CAN Bus logger makes it possible to look very closely into the log. This allows unknown CAN buses to be reverse engineered.