AiM RPM CAN muunnin / converter
RPM-CAN muunnin voi lukea signaalin seuraavista lähteistä:
- Puolan matalajännite puolelta (150...400 V)
- Kanttiaaltosignaalista (5...50 V)
CAN-väylä:
- Nopeus: 1 Mbit/s
- CAN viesti: 0x200
- Järjestys: Little Endian
- Ensimmäinen bitti: 0
- Pituus: 32-bit
Jos liität muuntimen AiM laitteeseen, huomioi seuraavat kohdat:
- Valitse haluttu kerroin sytytysluvun mukaisesti
- Liitä muunnin AiM laitteen CAN-väylään (CAN 1 tai CAN 2)
- Valitse konfiguraatioon “AIM-RPM_CAN_CONV” protokolla
The RPM-CAN Converter may read the signal from:
- the low voltage of the coil (150 to 400 V)
- a square wave signal (5 to 50 V)
CAN BUS:
- Rate: 1Mbit/s
- ID CAN: 0x200
- Endianness: Little Endian
- Start Bit: 0
- Length: 32-bit
If you connect the RPM-CAN Converter to an AiM device, please, follow the next steps:
- Select the desired RPM multiplier factor, in dependence upon your engine and the number of sparks per revolution.
- Connect the RPM-CAN Converter to the ECU input of the AiM device
- Select the ECU Protocol “AIM-RPM_CAN_CONV” in the device configuration, in order to receive the RPM value from the RPM-CAN Converter.