CANchecked MCE8 Analog - CAN muunnin

€160,00
Yksikköhinta kohti

Sisältää veron. Toimituskulut lasketaan kassalla.

CANchecked MCE08 analog - CAN bus muunnin

MCE08 on analogiasignaalien CAN muunnin esim. CANchecked näytöile joihin halutaan lisää kanavia perus kanavien lisäksi. MFD28, MFD15, MFD32, MFD32S on vakiona nelkä analogia kanavaa.

Koko: 64x49x19 mm
Molex MicroFit liittimet ja lyhyet liitosjohdot tulevat paketissa mukana
CAN-väylänopeus: 500 kBit/s

Can Bus signaalit

0x700 little endian / Intel 100ms (10Hz) Min / max

Byte 1: 2 AIN1 0-1023 (10bit)

Byte 3: 4 AIN2 0-1023 (10bit)

Byte 5: 6 AIN3 0-1023 (10bit)

Byte 7: 8 AIN4 0-1023 (10bit)

0x701

Byte 1: 2 AIN5 (1K pullup internal) 0-1023 (10bit)

Byte 3: 4 AIN6 (1K pullup internal) 0-1023 (10bit)

Jos tarvitset DBC tiedoston, ota yhteyttä.

CANchecked MCE08 analog to CAN bus

MCE08 stands for "Multifunction Can Bus Extension" with 8 connections (currently actually 6) - why is this module needed?

CANchecked displays ( MFD28 , MFD15 , MFD32 , MFD32S ) have four analog inputs. However, in some applications this can be too little and more inputs are required.

It makes sense to map this using the flexible Can Bus protocol. For this purpose, the sensors are connected to our MCE08 and sent via Can Bus to the device to be received - e.g. one of our displays.

With only 64x49x19mm, the box is kept very compact and can be placed anywhere. The connectors are Molex MicroFit and are included in the scope of delivery together with short connecting cables and pins to crimp yourself.

Two straps are attached to the side for attachment. In addition, there is a fastening for the strain relief of the cables on the top, where a cable tie can easily be attached.

The Can Bus data are currently permanently assigned. Please indicate changes before ordering.

Identifier 0x700 little endian / Intel 100ms (10Hz) Min / max