Peak PCAN-USB CAN-bus

  • €258,00
    Yksikköhinta kohti 
Sisältää veron. Toimituskulut lasketaan kassalla.


Peak PCAN-USB:llä voidaan lukea ja tallentaa CAN väylän liikennettä. Muuntimella voidaan myös ohjelmoida CAN laitteita lähettämällä väylään ohjelmointi viestejä

PCAN-USB:lla voidaan ohjelmoida mm. Tremondin, Alsensen, Izze-Racing ja ASL CAN tuotteita.

PCAN-USB:ta käytetään ilmaisella PC-ohjelmalla CAN monitor PCAN-View for Windows®.

PCAN:lla voidaan lukea Bit rate nopeuksia 5 kbit/s >> 1 Mbit/s.

Tekniset tiedot alla englanniksi.

Saatavilla D vastaliitin ja / tai D vastaliitin valmiiksi liitetyllä suojatulla parikaapelilla (2 m)


With Peak PCAN-USB converter you can program Tremondi, Alsense, Izze-Racing, ASL... products.

The PCAN-USB adapter enables simple connection to CAN networks.

The package is also supplied with the CAN monitor PCAN-View for Windows® and the programming interface PCAN-Basic.

  • Adapter for the USB connection (Full-Speed mode, compatible with USB 1.1, USB 2.0, and USB 3.0)
  • High-speed CAN connection (ISO 11898-2)
  • Bit rates from 5 kbit/s up to 1 Mbit/s
  • Time stamp resolution approx. 42 µs
  • Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
  • CAN bus connection via D-Sub, 9-pin
    (in accordance with CiA® 303-1)
  • NXP SJA1000 CAN controller, 16 MHz clock frequency
  • NXP PCA82C251 CAN transceiver
  • 5-Volt supply to the CAN connection can be connected through a solder jumper, e.g. for external bus converter
  • Galvanic isolation on the CAN connection up to 500 V (only for IPEH-002022)
  • Voltage supply via USB
  • Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)

D-Sub mating connector and / or a D-Sub with ready made protected pair cable (2 m) available.