SWP-WRC3.3 ratti paneli CAN
- Suunniteltu OMP 320 ALU ratille, jonka halkaisija 320 mm. Kiinnitys rattiin kolmella pultilla ja tukilevyllä. FIA säännön mukaan ratin puolia ei saa muokata.
- 1 kpl CAN, Mbit/s, 2.0B
- Väylä nopeus valittavissa: 1 Mbit/s, 500 kbit/s, 250 kbit/s, 200 kbit/s, 125 kbit/s ja 100 kbit/s
- 120 Ω päätevastus
- Oikosulkusuojaus
- 1 kpl digitaalinen sisääntulo
- Sisääntulovastus: 4.7 kΩ (5V pull-up)
- 8 kpl painonappeja, taustavalot ja 2 kpl LED valoja
- Napin tila lähetetään CAN viestinä
- 2 kpl kiertokytkimiä, tila lähetetään CAN viestinä
- 2 kpl On–Off drivers
- High side driver Vbattery, up to 1 A
- Output voltage reread
- Linear current limitation
- Oikosulkusuoja
- Ylikuorma ja lämpötila hälytys ja suoja
- 2 kpl LED tilaväriä napeissa (punainen – vihreä)
- Aktivointi CAN viesteinä
- Kaikki LED velot voidaan määritellä napin asennosta riippumatta
- LED valon kirkkaus määriteltävissä ohjelmalla
- 6 kpl väri LED:ä kiertokytkimissä
- LED värejä voidaan muokata tilauksesta
- Näyteresoluution 10 bit
- Lämpötila-alue: -40 / +120 °C
- 2 kpl High side switch outputs voltage reread
- Jännite partition 20 mV
- Analogia anti aliasing filter
- Tarrat tilauksesta
- Mitat:
- Johdon kanssa: 189 x 118 x 24 mm
- Kiertokytkimien kanssa: 189 x 118 x 39 mm
- Johto avoimilla päillä
- Runko billet alumiini ja ABS kuori
- IP54 roiskesuojattu
- Paino 245 g
Membrane Steering Wheel Panel
Designed for OMP 320 ALU steering wheel. Steering wheel diameter 320 mm. Fixing on steering wheel by 3 bolts and support plate. Steering wheel spokes cannot be modified - FIA regulation.
1 CAN line
- 1 Mbit/s throughtput data rate
- Selectable bus speed: 1 Mbit/s, 500 kbit/s, 250 kbit/s, 200 kbit/s, 125 kbit/s and 100 kbit/s
- 2.0B protocol
- Software selectable 120 Ω terminator
- Protection against short circuit to ground and battery
1 Digital input for programming enable (ENCP)
- Input resistance: 4.7 kΩ (5V pull-up)
- Protection against short circuit to Vbattery.
Upto 8 Keyboard buttons
- With backlighting
- With integrated 2 – color gauge LED
- Button state transmitted on CAN
2 Mechanical rotary switches
- Compact design – PCB mounted
- Switch state transmitted on CAN
- Mechanical endless with electrical „smart stop“ feature
- Number of positions adjustable by SW
2 On–Off drivers
- High side driver Vbattery, up to 1 A
- Output voltage reread
- Linear current limitation
- Protection against short circuit to ground
- Overload, over temperature feedback and protection
Upto 10 Gauge LEDs
- 2 color state (red – green)
- Integrated in keyboard buttons
- Activation received from CAN
- Each LED controlled independently from button
- LED color adjustable by SW within red – green scale
- Brightness adjustable by SW
2 Status Gauge LED groups at rotary switches
- 6 single colour LEDs at each rotary switch
- Each LED group has its independent control – internally (by firmware) or via CAN
- Position can be memorized at power off
- LED colors can be modified on request (HW modification)
1 Internal temperature
- Sampling resolution: 10 bits
- Temperature range: -40 / +120 °C
2 High side switch outputs voltage reread
- Sampling resolution: 10 bits
- Voltage partition 20 mV
- Analogue anti aliasing filter
Preliminary overall dimensions
- Without cable: 189 x 118 x 24 mm
- Including rotary knobs: 189 x 118 x 39 mm
- Connector: cable with free leads (colour coded)
Enclosure
- Machined aluminum / ABS cover
- IP grade IP54
Weight (without steering wheel)
- approx 245 g
Panel mounting on steering wheel
- Requirements on the mounting system (apart of fixing function)
- maximum protection of panel when handling out of the car
- minimum added weight
- simple steering column cable
- steering wheel spokes cannot be modified - FIA regulation
- Rear cover shaped to be centered on steering wheel – designed for OMP 320 ALU with 320 mm diameter.
- Fixing on steering wheel by 3 bolts and support plate
Keyboard layout, shape
- Layout - button positions are optimised to be easillyreachable with the thumb keeping the hand on handgrip
- Laout graphics is an integral part of the membrane applied by seriography
- Relief of buttons are heighten by applying silicone caps on the top of the buttons (height increase upto cca 1.5 mm)